Glass Removal & Replacement

Safe Work Procedures - Window Installation

General/Brief Description of task	Installation of glass or mirrors, as either a replacement or new
Frequency of task performed	On demand
Hazards Identified	#1 – Falling Objects #8 – Eye Injury #10 – Lifting #15 - Cuts
P.P.E. required: Special tools required (if any)	Safety Glasses Gloves Suction cup
Safe Work Procedure	Inspect immediate area for any existing or potential hazards before starting the job Refer to Safe Work Practices on “Defective Tools”, “Use of Non-Powered Hand Tools”, “Use of Power Tools”, “Use of Electrical Extension Cords”, and “Electrical Safety”. Cover broken glass with cardboard until replacement comes in. If glass is completely broken, remove and replace with plywood. Always wear gloves when removing old glass. If broken glass is elevated and badly shattered safety glasses should be worn. Take proper care when lifting new glass into place. Units that are larger than 3’ x 3’ square, will usually require 2 people to lift. Refer to Safe Work Practices on “Proper Lifting Techniques” as found in Appendix ‘A’ Larger units can be better handled and set into place by the use of suction cup and an assistant. Windows damaged above walkways will require barricades and warning tape to safely rope off area while work is taking place, to prevent falling objects from injuring passersby. Refer to Safe Work Practices on “Use of Portable Ladders” and “Use of Step Ladders” as found in Appendix ‘A’.

Download Glass Removal & Replacement Safe Work Procedures Reference Sheet.pdf