Patching

Safe Work Procedures - Patching

General/Brief Description of task Patching of holes in wall to prepare for painting
Frequency of task performed Daily
Hazards Identified #4 – Dust / Vapours
P.P.E. required: Special tools required (if any)
  • Dust Mask
  • Pole & Hand Sanders
  • Trowels
  • Filler Pans/Hawk
Safe Work Procedure
  • Visually inspect area for possible hazards
  • Refer to product labels for any necessary precautions to take
  • Add water to Filler to obtain desired thickness
  • Scoop mud onto hawk
  • Using trowel, fill holes with Patching Filler and smooth to blend with wall
  • Let patching dry prior to painting
  • Sand with 120 grit sandpaper
  • Apply finish to wall

For larger holes

  • Cut piece out and fit with drywall
  • Tape and apply Filler to blend with wall
  • Apply one coat of primer and 2 coats of finish allowing adequate time between coats for product to dry

Download Patching Safe Work Procedurs Reference Sheet.pdf